Fabric Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== 像素视线追踪 ======

假如你想知道你的屏幕的某个像素对应哪个方块或者实体，可以使用像素视线追踪。

这些都是客户端层面的。

有两种情况：中心像素（准星）和任意像素。

===== 特例：中心像素 =====

可以这样完成：

<code java [enable_line_numbers="true"]>
MinecraftClient client = MinecraftClient.getInstance();
HitResult hit = client.crosshairTarget;

switch(hit.getType()) {
    case Type.MISS:
        //nothing near enough
        break; 
    case Type.BLOCK:
        BlockHitResult blockHit = (BlockHitResult) hit;
        BlockPos blockPos = blockHit.getBlockPos();
        BlockState blockState = client.world.getBlockState(blockPos);
	Block block = blockState.getBlock();
        break; 
    case Type.ENTITY:
        EntityHitResult entityHit = (EntityHitResult) hit;
        Entity entity = entityHit.getEntity();
        break; 
}
</code>

==== 对于任意触及距离 ====

上述代码允许正常的触及距离，生存模式3个方块，创造模式4.5个方块。如果你需要视线追踪更远的距离，可以使用下面的一般案例。

===== 一般案例：任意像素  =====

示例[[https://github.com/EmmanuelMess/BoundingBoxMinecraftMod|在此处]]。

对于这个，我们需要先计算出一些数值：

<code java [enable_line_numbers="true"]>
MinecraftClient client = MinecraftClient.getInstance();
int width = client.getWindow().getScaledWidth();
int height = client.getWindow().getScaledHeight();
Vec3d cameraDirection = client.cameraEntity.getRotationVec(tickDelta);
double fov = client.options.fov;
double angleSize = fov/height;
Vector3f verticalRotationAxis = new Vector3f(cameraDirection);
verticalRotationAxis.cross(Vector3f.POSITIVE_Y);
if(!verticalRotationAxis.normalize()) {
    return;//相机直接指向顶部或者底部，你需要修复这个
}

Vector3f horizontalRotationAxis = new Vector3f(cameraDirection);
horizontalRotationAxis.cross(verticalRotationAxis);
horizontalRotationAxis.normalize();

verticalRotationAxis = new Vector3f(cameraDirection);
verticalRotationAxis.cross(horizontalRotationAxis);
</code>

有了这个之后，可以使用这个函数来计算对应某个像素的方向向量：
<code java [enable_line_numbers="true"]>
private static Vec3d map(float anglePerPixel, Vec3d center, Vector3f horizontalRotationAxis,
    Vector3f verticalRotationAxis, int x, int y, int width, int height) {
    float horizontalRotation = (x - width/2f) * anglePerPixel;
    float verticalRotation = (y - height/2f) * anglePerPixel;
    
    final Vector3f temp2 = new Vector3f(center);
    temp2.rotate(verticalRotationAxis.getDegreesQuaternion(verticalRotation));
    temp2.rotate(horizontalRotationAxis.getDegreesQuaternion(horizontalRotation));
    return new Vec3d(temp2);
}
</code>

然后你需要有 ''GameRenderer#updateTargetedEntity'' 处代码的重新实现：
<code java [enable_line_numbers="true"]>
private static HitResult raycastInDirection(MinecraftClient client, float tickDelta, Vec3d direction) {
    Entity entity = client.getCameraEntity();
    if (entity == null || client.world == null) {
        return null;
    }

    double reachDistance = client.interactionManager.getReachDistance();//Change this to extend the reach
    HitResult target = raycast(entity, reachDistance, tickDelta, false, direction);
    boolean tooFar = false;
    double extendedReach = reachDistance;
    if (client.interactionManager.hasExtendedReach()) {
        extendedReach = 6.0D;//改变此值以扩展触及距离
        reachDistance = extendedReach;
    } else {
        if (reachDistance > 3.0D) {
            tooFar = true;
        }
    }

    Vec3d cameraPos = entity.getCameraPosVec(tickDelta);

    extendedReach = extendedReach * extendedReach;
    if (target != null) {
        extendedReach = target.getPos().squaredDistanceTo(cameraPos);
    }

    Vec3d vec3d3 = cameraPos.add(direction.multiply(reachDistance));
    Box box = entity
            .getBoundingBox()
            .stretch(entity.getRotationVec(1.0F).multiply(reachDistance))
            .expand(1.0D, 1.0D, 1.0D);
    EntityHitResult entityHitResult = ProjectileUtil.raycast(
            entity,
            cameraPos,
            vec3d3,
            box,
            (entityx) -> !entityx.isSpectator() && entityx.collides(),
            extendedReach
    );

    if (entityHitResult == null) {
        return target;
    }

    Entity entity2 = entityHitResult.getEntity();
    Vec3d vec3d4 = entityHitResult.getPos();
    double g = cameraPos.squaredDistanceTo(vec3d4);
    if (tooFar && g > 9.0D) {
        return null;
    } else if (g < extendedReach || target == null) {
        target = entityHitResult;
        if (entity2 instanceof LivingEntity || entity2 instanceof ItemFrameEntity) {
            client.targetedEntity = entity2;
        }
    }

    return target;
}

private static HitResult raycast(
        Entity entity,
        double maxDistance,
        float tickDelta,
        boolean includeFluids,
        Vec3d direction
) {
    Vec3d end = entity.getCameraPosVec(tickDelta).add(direction.multiply(maxDistance));
    return entity.world.raycast(new RaycastContext(
            entity.getCameraPosVec(tickDelta),
            end,
            RaycastContext.ShapeType.OUTLINE,
            includeFluids ? RaycastContext.FluidHandling.ANY : RaycastContext.FluidHandling.NONE,
            entity
    ));
}
</code>

有了这个方向以及视线追踪之后，可以把这些都放到一起：
<code java [enable_line_numbers="true"]>
Vec3d direction = map(
        (float) angleSize,
        cameraDirection,
        horizontalRotationAxis,
        verticalRotationAxis,
        x,
        y,
        width,
        height
);
HitResult hit = raycastInDirection(client, tickDelta, direction);

switch(hit.getType()) {
    case Type.MISS:
        //nothing near enough
        break; 
    case Type.BLOCK:
        BlockHitResult blockHit = (BlockHitResult) hit;
        BlockPos blockPos = blockHit.getBlockPos();
        BlockState blockState = client.world.getBlockState(blockPos);
	Block block = blockState.getBlock();
        break; 
    case Type.ENTITY:
        EntityHitResult entityHit = (EntityHitResult) hit;
        Entity entity = entityHit.getEntity();
        break; 
}
</code>

其中 x 和 y 是你的像素坐标。

==== 性能考虑 ====

函数开销较大，如果多次计算，会导致游戏变慢。如果仅需要对于更长的触及距离，如果需要每帧做多次视线追踪，可以参考[[https://stackoverflow.com/q/777997/3124150|此链接]]。