User Tools

Site Tools


tutorial:networking

This is an old revision of the document!


Page Information

This page has replaced the old networking page. It is recommended to use the new networking api described on this page. The old page can be found here.

Networking

Networking in Minecraft is used so the client and server can communicate with each other. Networking is a broad topic so this page is split up into a few categories.

Example: Why is networking important?

The importance of networking can be shown by a simple code example. This code should NOT be used and is here to explain why networking is important.

Say you had a wand which highlights the block you are looking at to all nearby players.

  1. class HighlightingWandItem extends Item {
  2. public HighlightingWand(Item.Settings settings) {
  3. super(settings)
  4. }
  5.  
  6. public TypedActionResult<ItemStack> use(World world, PlayerEntity user, Hand hand) {
  7. // Raycast and find the block the user is facing at
  8. BlockPos target = ...
  9.  
  10. // BAD CODE: DON'T EVER DO THIS!
  11. ClientBlockHighlighting.highlightBlock(MinecraftClient.getInstance(), target);
  12. return super.use(world, user, hand);
  13. }
  14. }

Upon testing, you will see the block you are facing at is highlighted and nothing crashes. Now you want to show the mod to your friend, you boot up a dedicated server and invite your friend on with the mod installed. You use the item and the server crashes… You will probably notice in the crash log an error similar to this:

[Server thread/FATAL]: Error executing task on Server
java.lang.RuntimeException: Cannot load class net.minecraft.client.MinecraftClient in environment type SERVER

Why does the server crash?

The code calls logic only present on the client distribution of the Minecraft. The reason for Mojang distributing the game in this way is to cut down on the size of the Minecraft server jar file. There isn't really a reason to include an entire rendering engine when your own machine will render the world. In a development environment, client only classes are indicated by the @Environment(EnvType.CLIENT) annotation.

How do I fix the crash?

In order to fix this issue, you need to understand how Minecraft communicates between the game client and dedicated server.

The diagram above shows that the game client and dedicated server art separate systems bridged together using packets. This packet bridge does not only exist between a game client and dedicated server, but also between your client and another client connected over LAN. The packet bridge is also present even in singleplayer! This is because the game client will spin up a special integrated server instance to run the game on. The key difference between the three types of connections that are shown in the table below:

Connection Type Access to game client
Connected to Dedicated Server None → Server Crash
Connected over LAN Yes → Not host game client
Singleplayer (or LAN host) Yes → Full access

It may seem complicated to have to communication with the server in three different ways. However you don't need to communicate in three different ways with the game client. Since all three connection types communicate with the game client using packets, you only need to communicate with the game client like you are always running on a dedicated server. Connection to server over LAN or Singleplayer can be also be treated like the server is a remote dedicated server; so your game client cannot directly access the server instance.

An introduction to networking

To begin, we need to fix an issue with the example code shown above. Since we are using packets to communicate with the client, we want to make sure the packets are only sent when an action is initiated on the server.

Sending a packet to the game client

  1. public TypedActionResult<ItemStack> use(World world, PlayerEntity user, Hand hand) {
  2. // Verify we are processing the use action on the logical server
  3. if (world.isClient()) return super.use(world, user, hand);
  4.  
  5. // Raycast and find the block the user is facing at
  6. BlockPos target = ...
  7.  
  8. // BAD CODE: DON'T EVER DO THIS!
  9. ClientBlockHighlighting.highlightBlock(MinecraftClient.getInstance(), target);
  10. return TypedActionResult.success(user.getStackInHand(hand));
  11. }

Next we need to send the packet to the game client. First you need to define an Identifier used to identify your packet. For this example our Identifier will be wiki_example:highlight_block. In order to send the packet to the game client, you need to specify which player's game client you want to packet to be received by. Since the action is occurring on the logical server, we may upcast the player to a ServerPlayerEntity.

To send the packet to the player, we will use some of the methods inside of ServerPlayNetworking. We will use the following method inside of that class:

public static void send(ServerPlayerEntity player, Identifier channelName, PacketByteBuf buf) {
    ...

The player in this method is the player the packet will be sent to. The channel name is the Identifier you decided on earlier to identify your packet. The PacketByteBuf is what stores the data for the packet. We will return later to writing data to the packet's payload via the buf.

Since we are not writing any data to the packet for now, we will send the packet with an empty payload. A buf with an empty payload may be created using PacketByteBufs.empty().

  1. ....
  2. ServerPlayNetworking.send((ServerPlayerEntity) user, ModNetworkingConstants.HIGHLIGHT_PACKET_ID, PacketByteBufs.empty());
  3. return TypedActionResult.success(user.getHandStack(hand));
  4. }

Though you have sent a packet to the game client, the game client cannot do anything with the packet since the client does not know how to receive the packet. Information on receiving a packet on the game client is shown below:

Receiving a packet on the game client

To receive a packet from a server on the game client, your mod needs to specify how it will handle the incoming packet. In your client entrypoint, you will register the receiver for your packet using PlayClientNetworking.registerGlobalReceiver(Identifier channelName, ChannelHandler channelHandler)

The Identifier should match the same Identifier you use to send the packet to the client. The ChannelHandler is the functional interface you will use to implement how the packet is handled. Note the ChannelHandler should be the one that is a nested interface of ClientPlayNetworking

The example below implements the play channel handler as a lambda:

  1. ClientPlayNetworking.registerGlobalReceiver(ModNetworkingConstants.HIGHLIGHT_PACKET_ID, (client, handler, buf, responseSender) -> {
  2. ...
  3. });

However you cannot draw the highlight box immediately. This is because the receiver is called on the netty event loop. The event loop runs on another thread, and you must draw the highlight box on the render thread.

In order to draw the highlight box, you need to schedule the task on the game client. This may be done with the client field that is provided in the channel handler. Typically you will run the task on the client by using the execute method:

  1. ClientPlayNetworking.registerGlobalReceiver(ModNetworkingConstants.HIGHLIGHT_PACKET_ID, (client, handler, buf, responseSender) -> {
  2. client.execute(() -> {
  3. // Everything in this lambda is run on the render thread
  4. ClientBlockHighlighting.highlightBlock(client, target);
  5. });
  6. });

You may have noticed you are not told where the block to highlight is. You can write this data to the packet byte buf. Instead of sending PacketByteBufs.empty() to the game client in your item's use method, instead you will create a new packet byte buf and send that instead.

  1. PacketByteBuf buf = PacketByteBufs.create();

Next you need to write the data to the packet byte buf. It should be noted that you must read data in the same order you write it.

  1. PacketByteBuf buf = PacketByteBufs.create();
  2.  
  3. buf.writeBlockPos(target);

Afterwards you will send the buf field through the send method.

To read this block position on the game client, you can use PacketByteBuf.readBlockPos().

You should read all data from the packet on the network thread before scheduling a task to occur on the client thread. You will get errors related to the ref count if you try to read data on the client thread. If you must read data on the client thread, you need to retain() the data and then read it on the client thread. If you do retain() the data, make sure you release() the data when you no longer need it.

In the end, the client's handler would look like this:

  1. ClientPlayNetworking.registerGlobalReceiver(ModNetworkingConstants.HIGHLIGHT_PACKET_ID, (client, handler, buf, responseSender) -> {
  2. // Read packet data on the event loop
  3. BlockPos target = buf.readBlockPos();
  4.  
  5. client.execute(() -> {
  6. // Everything in this lambda is run on the render thread
  7. ClientBlockHighlighting.highlightBlock(client, target);
  8. });
  9. });

Sending packets to the server and receiving packets on the server

Sending packets to a server and receiving a packet on the server are very similar to how you would on the client. However there are a few key differences.

Firstly sending a packet to the server is done through ClientPlayNetworking.send. Receiving a packet on the server is similar to receiving a packet on the client, using the ServerPlayNetworking.registerGlobalReceiver(Identifier channelName, ChannelHandler channelHandler) method. The ChannelHandler for the server networking also passes the ServerPlayerEntity (player) who sent the packet through the player parameter.

The concept of tracking and why you only see the highlighted block

Now that the highlighting wand properly uses networking so the dedicated server does not crash, you invite your friend back on the server to show off the highlighting wand. You use the wand and the block is highlighted on your client and the server does not crash. However your friend does not see the highlighted block. This is intentional with the code that you already have here. To solve this issue let us take a look at the item's use code:

  1. public TypedActionResult<ItemStack> use(World world, PlayerEntity user, Hand hand) {
  2. // Verify we are processing the use action on the logical server
  3. if (world.isClient()) return super.use(world, user, hand);
  4.  
  5. // Raycast and find the block the user is facing at
  6. BlockPos target = ...
  7. PacketByteBuf buf = PacketByteBufs.create();
  8. buf.writeBlockPos(target);
  9.  
  10. ServerPlayNetworking.send((ServerPlayerEntity) user, ModNetworkingConstants.HIGHLIGHT_PACKET_ID, buf);
  11. return TypedActionResult.success(user.getHandStack(hand));
  12. }

You may notice the item will only send the packet to the player who used the item. To fix this, we can use the utility methods in PlayerLookup to get all the players who can see the highlighted block.

Since we know where the highlight will occur, we can use PlayerLookup.tracking(ServerWorld world, BlockPos pos) to get a collection of all players who can see that position in the world. Then you would simply iterate through all players in the returned collection and send the packet to each player:

  1. public TypedActionResult<ItemStack> use(World world, PlayerEntity user, Hand hand) {
  2. // Verify we are processing the use action on the logical server
  3. if (world.isClient()) return super.use(world, user, hand);
  4.  
  5. // Raycast and find the block the user is facing at
  6. BlockPos target = ...
  7. PacketByteBuf buf = PacketByteBufs.create();
  8. buf.writeBlockPos(target);
  9.  
  10. // Iterate over all players tracking a position in the world and send the packet to each player
  11. for (ServerPlayerEntity player : PlayerLookup.tracking((ServerWorld) world, target)) {
  12. ServerPlayNetworking.send(player, ModNetworkingConstants.HIGHLIGHT_PACKET_ID, buf);
  13. }
  14.  
  15. return TypedActionResult.success(user.getHandStack(hand));
  16. }

After this change, when you use the wand, you friend should also see the highlighted block on their own client.

Advanced Networking topics

The Networking system Fabric API supplies is very flexible and supports additional features other than just sending and receiving simple packets. As some of these more advanced topics are long, here are links to their specific pages:

Networking Topic Description
Connection Network connection events Events related to the the lifecycle of a connection to a client or server
Channel registration events Events related to a server of client declaring the ability to receive a packet on a channel of a specific name
Login phase networking Sending requests to a client during login; and allowing delay of login for a short amount of time
Dynamic registration of channel handlers Allowing for a connection to receive a packet with a special handler
tutorial/networking.1607907456.txt.gz · Last modified: 2020/12/14 00:57 by zulrang