User Tools

Site Tools


tutorial:cursegradle

This is an old revision of the document!


Publishing mods on CurseForge with CurseGradle

To familiarize yourself with CurseGradle, please read the project's official wiki.

Fabric-specific changes

(Note: Last updated for Loom 0.2.5.)

The additions necessary for usage with Fabric have been highlighted in green. If you are using Loom 0.2.5 remapJar.output should be just remapJar instead.

They are, in order:

  • afterEvaluate { ... } - Loom's remapJar tweaks currently happen after evaluation, and as such remapJar.output can only be read then,
  • mainArtifact(remapJar) (or mainArtifact(remapJar.output) for Loom 0.2.4 and earlier) - the primary artifact submitted to CurseForge should be the output of remapJar, that is the remapped (production-ready) mod .JAR file,
  • uploadTask.dependsOn(remapJar) - make sure that the CurseForge upload task only runs once the remapped JAR has been built,
  • forgeGradleIntegration = false - as you're not using ForgeGradle, that specific integration has to be disabled.
tutorial/cursegradle.1565261917.txt.gz · Last modified: 2019/08/08 10:58 by fudge